Google Meet transports and hosts

Chrome, Chrome node, and Twilio transports, the Parallels macOS VM topology, and the host audio tools they need. Part of the Google Meet plugin guide.

Local Gateway + Parallels Chrome

A full Gateway or model API key is not required inside a macOS VM just to give it Chrome. Run the Gateway and agent locally; run a node host in the VM.

Runs where	What
Gateway host	OpenClaw Gateway, agent workspace, model/API keys, realtime provider, Google Meet plugin config
Parallels macOS VM	OpenClaw CLI/node host, Chrome, SoX, BlackHole 2ch, a Chrome profile signed in to Google
Not needed in the VM	Gateway service, agent config, model provider setup

Install VM dependencies, reboot, verify:

brew install blackhole-2ch sox
sudo reboot
system_profiler SPAudioDataType | grep -i BlackHole
command -v sox

Install the plugin in the VM, where it is enabled by default, and start the node host:

openclaw plugins install npm:@openclaw/google-meet
openclaw node run --host <gateway-host> --port 18789 --display-name parallels-macos

If <gateway-host> is a LAN IP without TLS, opt in for that trusted private network:

OPENCLAW_ALLOW_INSECURE_PRIVATE_WS=1 \
  openclaw node run --host <gateway-lan-ip> --port 18789 --display-name parallels-macos

Use the same flag when installing as a LaunchAgent (it is process environment, stored in the LaunchAgent environment when present on the install command, not an openclaw.json setting):

OPENCLAW_ALLOW_INSECURE_PRIVATE_WS=1 \
  openclaw node install --host <gateway-lan-ip> --port 18789 --display-name parallels-macos --force
openclaw node restart

Approve the node from the Gateway host, then confirm it advertises both googlemeet.chrome and browser capability/browser.proxy:

openclaw devices list
openclaw devices approve <requestId>
openclaw nodes status

Route Meet through that node:

{
  gateway: {
    nodes: {
      commands: { allow: ["googlemeet.chrome", "browser.proxy"] },
    },
  },
  plugins: {
    entries: {
      "google-meet": {
        enabled: true,
        config: {
          defaultTransport: "chrome-node",
          chrome: {
            guestName: "OpenClaw Agent",
            autoJoin: true,
            reuseExistingTab: true,
          },
          chromeNode: {
            node: "parallels-macos",
          },
        },
      },
    },
  },
}

Now join normally from the Gateway host:

openclaw googlemeet join https://meet.google.com/abc-defg-hij

For a one-command smoke test that creates or reuses a session, speaks a known phrase, and prints session health:

openclaw googlemeet test-speech https://meet.google.com/abc-defg-hij

During realtime join, browser automation fills the guest name, clicks Join/Ask to join, and accepts Meet’s first-run “Use microphone” prompt when it appears (or “Continue without microphone” during observe-only join and browser-only meeting creation). If the profile is signed out, Meet is waiting for host admission, Chrome needs mic/camera permission, or Meet is stuck on an unresolved prompt, the result includes manualAction: { reason, message }. Stop retrying, report that message plus browserUrl/browserTitle, and retry only after the manual action completes. If chromeNode.node is omitted, OpenClaw auto-selects only when exactly one connected node advertises both googlemeet.chrome and browser control; pin chromeNode.node (node id, display name, or remote IP) when several capable nodes are connected.

Common failure checks

Symptom	Fix
`Configured Google Meet node ... is not usable: offline`	The pinned node is known but unavailable. Report the setup blocker; do not silently fall back to another transport unless asked.
`No connected Google Meet-capable node`	Install `npm:@openclaw/google-meet` in the VM, run `openclaw plugins enable browser`, start `openclaw node run`, and approve pairing. If Google Meet was explicitly disabled, enable it too. Confirm `gateway.nodes.commands.allow` includes `googlemeet.chrome` and `browser.proxy`.
`BlackHole 2ch audio device not found`	On macOS, install `blackhole-2ch` on the host being checked and reboot.
`PipeWire-Pulse is unavailable`	On Linux, start the desktop user’s `pipewire-pulse` service and install `pulseaudio-utils`; do not run the node as root or outside the Chrome user’s audio session.
Chrome opens but cannot join	Sign in to the browser profile in the VM, or keep `chrome.guestName` set. Guest auto-join uses OpenClaw browser automation through the node browser proxy; point the node’s `browser.defaultProfile` (or a named existing-session profile) at the profile you want.
Duplicate Meet tabs	Leave `chrome.reuseExistingTab: true`. OpenClaw activates an existing tab for the same URL, and creation reuses an in-progress `.../new` or Google account prompt tab, before opening another.
No audio	Route Meet mic/speaker through the virtual audio path used by OpenClaw; use separate virtual devices or Loopback-style routing for clean duplex audio.

Install notes

The Chrome talk-back default uses host audio tools that OpenClaw does not bundle or redistribute:

sox: command-line audio utility. The plugin issues explicit CoreAudio device commands for the default 24 kHz PCM16 audio bridge.
blackhole-2ch: macOS virtual audio driver providing the BlackHole 2ch device Chrome/Meet route through.
pactl, pacat, and parec: Linux PulseAudio utilities used against PipeWire-Pulse to provision and stream through OpenClaw Meeting Audio.

SoX is licensed LGPL-2.0-only AND GPL-2.0-only; BlackHole is GPL-3.0. If you build an installer or appliance that bundles BlackHole with OpenClaw, review BlackHole’s upstream licensing or get a separate license from Existential Audio.

Transports

Transport	Use when
`chrome`	Chrome/audio live on the Gateway host
`chrome-node`	Chrome/audio live on a paired node (for example a Parallels macOS VM)
`twilio`	Phone dial-in fallback via the Voice Call plugin, when Chrome participation is not available

Chrome

Opens the Meet URL through OpenClaw browser control and joins as the signed-in OpenClaw browser profile. Before launch, the plugin checks or provisions the host’s native virtual-audio backend and then runs any configured audio bridge health/startup command. For local Chrome, pick the profile with browser.defaultProfile; chrome.browserProfile is passed to chrome-node hosts instead.

openclaw googlemeet join https://meet.google.com/abc-defg-hij --transport chrome
openclaw googlemeet join https://meet.google.com/abc-defg-hij --transport chrome-node

Chrome mic/speaker audio routes through the local OpenClaw audio bridge. If the native backend is unavailable, the join fails with a setup error instead of joining without an audio path.

Twilio

A strict dial plan delegated to the Voice call plugin. It does not parse Meet pages for phone numbers; Google Meet must expose a phone dial-in number and PIN for the meeting. Enable Voice Call on the Gateway host, not the Chrome node:

{
  plugins: {
    allow: ["google-meet", "voice-call", "google"],
    entries: {
      "google-meet": {
        enabled: true,
        config: {
          defaultTransport: "chrome-node",
          // or set "twilio" if Twilio should be the default
        },
      },
      "voice-call": {
        enabled: true,
        config: {
          provider: "twilio",
          inboundPolicy: "allowlist",
          realtime: {
            enabled: true,
            provider: "google",
            instructions: "Join this Google Meet as an OpenClaw agent. Be brief.",
            toolPolicy: "safe-read-only",
            providers: {
              google: {
                silenceDurationMs: 500,
                startSensitivity: "high",
              },
            },
          },
        },
      },
      google: {
        enabled: true,
      },
    },
  },
}

Provide Twilio credentials through environment to keep secrets out of openclaw.json:

export TWILIO_ACCOUNT_SID=AC...
export TWILIO_AUTH_TOKEN=...
export TWILIO_FROM_NUMBER=+15550001234
export GEMINI_API_KEY=...

Use realtime.provider: "openai" with OPENAI_API_KEY instead if OpenAI is the realtime voice provider. Restart or reload the Gateway after enabling voice-call; plugin config changes do not take effect until reload. Verify:

openclaw config validate
openclaw plugins list | grep -E 'google-meet|voice-call'
openclaw googlemeet setup

When Twilio delegation is wired, googlemeet setup includes twilio-voice-call-plugin, twilio-voice-call-credentials, and twilio-voice-call-webhook checks.

openclaw googlemeet join https://meet.google.com/abc-defg-hij \
  --transport twilio \
  --dial-in-number +15551234567 \
  --pin 123456

Use --dtmf-sequence for a custom sequence, with leading w or commas for a pause before the PIN:

openclaw googlemeet join https://meet.google.com/abc-defg-hij \
  --transport twilio \
  --dial-in-number +15551234567 \
  --dtmf-sequence ww123456#

Overview

Plugins

Plugin guides

Building plugins

Skills

Automation

Tools

Agent coordination

Google Meet transports and hosts

Local Gateway + Parallels Chrome

Common failure checks

Install notes

Transports

Chrome

Twilio

​Local Gateway + Parallels Chrome

​Common failure checks

​Install notes

​Transports

​Chrome

​Twilio

Local Gateway + Parallels Chrome

Common failure checks

Install notes

Transports

Chrome

Twilio